Sistem Pengepakan Dengan Metode Sortasi Pengaturan Kecepatan Konveyor Berdasarkan Ukuran Kemasan Menggunakan Outseal PLC Nano V.4 Dan Haiwell SCADA

Erik Wahyudi, Hikmatul Amri, Irwan Syarif

Abstract


The production process which is designed is a packaging system for the initial storage of products to be filled in the packaging, in this study a conveyor is designed that can sort objects using a proximity sensor and adjust the speed based on the size of the packaging using pulse width modulation (PWM), and can fill the packaging based on the size of the packaging. The product. Automatic control of packing using Outseal PLC Nano.V.4, the system can be controlled and monitored using Haiwell SCADA software on a PC. Outseal PLC nano V.4 test results can operate based on program commands that have been designed. The use of PWM Outseal PLC Nano V.4 on a 12 volt DC motor as a speed controller works in accordance with the duty cycle and PWM scale values given with an efficiency value of 86,56 % at at a PWM value of 900 and 86,23 % at a PWM value of 1023. HMI system made using Haiwell SCADA to control and monitor a successful packing system. Outseal PLC Nano V.4 can operate optimally with the SCADA system. The overall system test results of all sensor components, product packaging and HMI variables are 100 % successful, with an average processing time of packing size M for 11.62 seconds and size L for 14.58 seconds.

Keywords


Conveyor;pulse width modulation; Haiwell SCADA

Full Text:

PDF

References


Prismanto, T. Herdantyo, D. T. Nugroho, Y. Ramadhani, and A. Mubyarto, “Desain Dan Simulasi Sistem HMI (Human Machine Interface) Berbasis Citect SCADA Pada Konveyor Proses Di Industri,” in Seminar Nasional Edusaintek, 2018, pp. 253–262.

D. L. Zariatin, E. H. O. Tambunan, and A. Suwandi, “Rancang Bangun Simulator Sistem Pengepakan Produk Berbasis Progammable Logic Control,” Sintek, vol. 10, pp. 28–35, 2016.

Taufik and W. Putri, “Perancangan Prototype Early Warning System pada Kontrol On/Off Belt Conveyor Menggunakan PLC Siemens S7-300,” J. Optimasi Sist. Ind., vol. 14, no. 1, pp. 116–137, 2015.

A. Fikri, R. Susana, and D. Nataliana, “Monitoring Model Sistem Pengepakan dan Penyortiran Barang Berbasis SCADA,” J. Reka Elkomika, vol. 2, no. 4, pp. 285–300, 2014.

L. O. Aghenta and M. T. Iqbal, “Development of an IoT Based Open Source SCADA System for PV System Monitoring,” in 2019 IEEE Canadian Conference of Electrical and Computer Engineering, CCECE 2019, 2019, pp. 1–4.

E. Syahrizal and H. Amri, “Rancang Bangun Sistem SCADA Pengontrolan Kelistrikan AC dan PC Laboratorium Pemrograman Gedung Elektro,” INOVTEK Seri Elektro, vol. 1, no. 1, pp. 21–27, 2019.

A. Bakhtiar, Panduan Dasar Outseal Plc. 2019.

Y. D. Widiarto, M. E. I. Najoan, and M. D. Putro, “Sistem Penggerak Robot Beroda Vacuum Cleaner Berbasis Mini Computer Raspberry Pi,” J. Tek. Elektro dan Komput., vol. 7, no. 1, pp. 25–32, 2018.

D. Aryani, E. Sunandar, and F. Ramadhan, “Prototype Alat Pemilah Hasil Produksi Oli Otomatis Berdasarkan Kode Warna Menggunakan Sensor TCS 230,” J. CERITA, vol. 5, no. 1, pp. 43–54, 2019.

A. M. S. Yunus, Marhatang, A. M. Mulki, and M. R. Djalal, “Rancang Bangun Prototipe Kendali Kecepatan Motor Induksi Berdasarkan Perubahan Suhu Berbasis PWM,” J. INSTEK, vol. 4, no. 1, pp. 131–140, 2019.

S. M. Shinde and R. B. Patil, “Design and Analysis of a Roller Conveyor System for Weight Optimization and Material Saving,” Int. J. Emerg. Technol., vol. 3, no. 1, pp. 168–172, 2012.

N. Y. D. Setyaningsih and I. A. Rozaq, “Prototype Smart Home Kendali Logika Or Berbasis Arduino Uno,” Simetris J. Tek. Mesin, Elektro dan Ilmu Komput., vol. 8, no. 2, pp. 559–562, 2017.




DOI: http://dx.doi.org/10.33857%2Fpatj.v4i2.356

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution 3.0 License.

View My Stats

Editorial Office Department of Electrical Engineering :

Jl. Tun Abdul Razak, Paccinongang, Kec. Somba Opu, Kabupaten Gowa, Sulawesi Selatan 90235 | Email : pa.techjournal@gmail.com