DESIGN AND IMPLEMENTATION OF WIRELESS SENSOR AND ACTUATOR FOR PLC BASED SCADA SYSTEM IN STANDARD WATER FILTRATION PROCESS
DOI:
https://doi.org/10.33857/patj.v2i1.110Keywords:
SCADA, PLC, monitoring, control, wireless sensor, actuator wireless, WSN.Abstract
This research aims to design and implement a cheap, low power and reliable wireless sensor and actuator system which can be used in the PLC based SCADA system to overcome the limitations of wire media. The wireless sensor and actuator system can also be used as an alternative to reduce the amount of the used PLC within SCADA system. Usually, in a PLC based SCADA system, sensor and actuator are connected to PLC with wire. It has many limitations especially in terms of flexibility and resistance to interference noise, In the PLC based SCADA system with wire media also causes the number of the installed PLC will increase at each location that will be monitored or controlled. This is not efficient if the location has only a few sensors or actuators that are connected to PLC because it will have an impact on the greater costs due to expensive price of the PLC. In this research already designed a wireless sensor and actuator system based on WPAN technology (IEEE 802.15.4) is cheap, low power and reliable. The results reveal that the wireless sensor and actuator system is able to send data with good accuracy and also able to operate well when implemented to PLC based SCADA system with open loop control and closed loop control to control the water level in the tub filtration. From the results, it can be concluded that the wireless sensor and actuator system can be used in the PLC based SCADA system to overcome the limitations of wire media and can also be used as an alternative to reduce the amount of the used PLC within SCADA system.
References
Gang Zhao, “Wireless Sensor Network for Industrial Process Monitoring and Control: A Survey”, ISSN 1943-3581, Vol.3, No.1, Macrothink Institute, USA, 2011.
Action Nechibvute, Courage Mudzingwa, “Wireless Sensor Network for SCADA and Industrial Control Systems” International Journal of Engineering and Technology Vol.3, No.12, December 2013.
Hany Fouda, “Improving SCADA Operations Using Wireless Instrumentation” White paper, Schneider Electric, April 2010.
Edwin Chobot, Daniel Newby, Renee Chandler, Nusaybah Abu Mulaweh, Chao Chen, Carlos Pomalaza-Raez, “Design and Implementation of A Wireless Sensor and Actuator Network for Energy Measurement And Control At Home”, International Journal of Embedded System and Application (IJESA) Vol.3, No.1, March 2013.
ImanMorsi, Mohamed Mansour Mohamed Mostafa, “Wireless Gas Detector System Using Microcontrollers, PLC and SCADA System for Monitoring Environmental Pollution”, Applied Mechanics and Materials Vols.249-250, pp 247-255, Trans Tech Publications, Switzerland,2013
Muh. Niswar, “Materi Kuliah Jaringan Sensor Nirkabel”, Universitas Hasanuddin, Makassar, 2013.
Robert Faludi, “Building Wireless Sensor Networks” , O’Reilly Media, Inc., 1005 Gravenstein Highway North, Sebastopol, CA 95472, 2011. [8] Anonym, “Product Manual For XBeeâ„¢/XBee-PROâ„¢ OEM RF Modules”, Digi International. Inc, 2009.
Kaushik Bhuiya, Kintali Anish, Dwani Parekh, and Kilaru Laxmi Sahiti, “Low cost wireless control and monitoring using PLC and SCADA” International Journal of Scientific and Research Publications, Volume 3, Issue 9, September 2013.
Beny Firman, “Implementasi Komunikasi Data Berbasis Zigbee Pada SCADA (Supervisory Control And Data Acquisition) PLTMH”, Tesis UGM, Yogyakarta, 2012.
Khamdan Amin Bisyri, “Rancang Bangun Komunikasi Data Wireless Mikrokontroler Menggunakan Modul Xbee Zigbee” Departemen Ilmu Komputer Fakultas MIPA Institut Pertanian Bogor, Bogor, 2012.
David Bailey, Edwin Wright, “Practical SCADA for Industry” Newnes An imprint of Elsevier Linacre House, Jordan Hill, Oxford OX2 8DP 200 Wheeler Road, Burlington, MA 01803, 2003.
Keith Stouffer, Joe Falco, Karen Kent , “Guide to Supervisory Control and Data Acquisition (SCADA) and Industrial Control Systems Security” National Institute of Standards and Technology (NIST), U.S., 2006.
Synchrony 6410, Trends in SCADA for Automated Water Systems, Commonwealth Drive Roanoke, Virginia 24018, 2001.
Technical Information Bulletin 04-1, ”Supervisory Control And Data Acquisition (Scada) Systems”, National Communications System, U.S, 2004.
ILia Dormishev, Krenar Komoni, “Scada System Classification” Norwich Univeristy Center Of Exellence In Distributed Control System Security, 2003.
Citect SCADA User Guide, Schneider Electric Pty. Ltd., 2010.
Vijeo Citect Configuration Training Manual Version 7.0, Citect Pty. Ltd., 2007.
Andi Muh. Ardian, “Rancang Bangun Supervisory Control And Data Acquisition (SCADA) Pada Proses Pembubuhan Tawas Di PDAM KarangPilang 1 Surabaya”, Jurnal ITS, Surabaya, 2010.
Agfianto Eko Putra, ”PLC — Konsep, Pemrograman dan Aplikasi”, Gava Media Yogyakarta, 2004.
Unity Pro Program Languages and Structure Reference Manual, Schneider Electric Pty. Ltd., 2009.
Andhika Dwipradipta, “Perancangan SCADA pada Plant Sistem Pengolahan Air Limbah”, Jurnal UNDIP, Semarang, 2012.
Downloads
Additional Files
Published
Issue
Section
License
Authors who publish with this journal agree to the following terms:
- The copyright of the accepted for publication articles shall be assigned to patria artha technologocal journal as the publisher of the journal. The intended copyright includes the rights to publish articles in various forms (including reprints).
- Patria artha technologocal journal maintain the publishing rights of the published articles.
- Authors are permitted to republish or disseminate published articles by sharing the link/DOI of the article at patria artha technologocal journal. Authors are allowed to use their articles for any legal purposes deemed necessary without written permission from patria artha technologocal journal with an acknowledgment of initial publication to this journal.
This work is licensed under a Creative Commons Attribution 3.0 License
