PERANCANGAN ANTENA MIKROSTRIP ULTRA WIDE BAND DENGAN MATERIAL TEKSTIL UNTUK APLIKASI WIRELESS BODY AREA NETWORKS
DOI:
https://doi.org/10.33857/patj.v3i1.222Keywords:
Antenna, Textile, Ultra Wide Band, WBANAbstract
Ultra Wide Band (UWB) microstrip antenna designed using textile materials for Wireless Body Area Network (WBAN) applications is presented. The antenna consists of stairs patches and a ground plane with a dimension of 30 mm x 30 mm. Simulation is done by compared antenna performance using cotton, denim, felt and fleece materials. In this study, the parameters considered in the analysis process are the characteristics of S11 and gain value. Numerical evaluation based on simulation shows that the antenna performance well operated in the UWB frequency standard by FCC (3.1 - 10.6 GHz) with the bandwidth of ≥ 500 MHz. The use of felt material produces a wider bandwidth (3900 MHz). The fleece material provided a higher gain value on 6.51 dBi at the resonant frequency of 8.5 GHz.
Downloads
Published
Issue
Section
License
Authors who publish with this journal agree to the following terms:
- The copyright of the accepted for publication articles shall be assigned to patria artha technologocal journal as the publisher of the journal. The intended copyright includes the rights to publish articles in various forms (including reprints).
- Patria artha technologocal journal maintain the publishing rights of the published articles.
- Authors are permitted to republish or disseminate published articles by sharing the link/DOI of the article at patria artha technologocal journal. Authors are allowed to use their articles for any legal purposes deemed necessary without written permission from patria artha technologocal journal with an acknowledgment of initial publication to this journal.
This work is licensed under a Creative Commons Attribution 3.0 License
