Rancang Bangun Sistem Sortir Benda Berbasis Programable Logic Control (PLC)

Authors

  • Irvawansyah Irvawansyah Politeknik Bosowa
  • Mukhlisin Mukhlisin Politeknik Bosowa

DOI:

https://doi.org/10.33857/patj.v3i2.243

Abstract

This research aims to (1) Create a PLC-based object sorting automation system and (2) Create a system-controlled sorting of objects sort automation. The research methods of this research consist in phases (1) Identification problems, (2) designing, (3) development (4) trials. Based on the research the system has been implemented can detect objects by utilizing the IR Proximity sensor with a distance of 30 mm — 800 mm and can be adjusted as needed. This system used IR Proximity reading range 50 mm. IR Proximity sensors are also used to detect the height level of an object and calculate a sorted object. This object sorting system is controlled using PLC. Programs for object sorting systems can be created with the Leadder Diagram, ST, and FBD language programs. For PLC and PC communication using LAN cable.

References

I. Irvawansyah and A. A. Rahmansyah, “Prototype of Monitoring and Control System of SCADA-based Water Tank Level,” JTT (Jurnal Teknol. Ter., vol. 4, no. 1, 2018.

B. Bustamin and I. Nurdin, “Rancang Bangun Sistem Start Otomatis Generator Tiga Fase Berbasis Plc Di Universitas Patria Artha,” Patria Artha Technol. J., vol. 2, no. 2, pp. 83—92, 2018.

R. Aminuddin, M. Rais, and M. A. H. Sirad, “Implementasi Sistem Pengontrolan Smart Parking Menggunakan Mikrokontroler Arduino Uno Di Universitas Patria Artha,” Patria Artha Technol. J., vol. 2, no. 2, pp. 123—132, 2018.

Kementrian Perindustrian Republik Indonesia, “Kemenperin Bertekad Pacu Pertumbuhan Industri,” January 2018. [Online]. Available: http://www.kemenperin.go.id/artikel/15917/ Kemenperin-Bertekad-Pacu-Pertumbuhan- Industri.

Wulandari dan H. D. Surjono, “Pengaruh Problem-Based Learning Terhadap Hasil Belajar Ditinjau dari Moitvasi Belajar PLC Di SMK,” Jurnal Pendidikan VOkasi, vol. 4, no. 2, pp. 178-191, 2013.

Setiawan dan B. Suprianto, “Pengembangan Trainer dan Job-Sheet PLC Sebagai Media Pemebelajaran Pada Mata Diklat PLC di Jurusan Elektronika Industri SMK Negeri 2 Lamongan,” Jurnal Pendidikan Teknik Elektro Vol. 03 No. 03, pp. 509-515, 2014.

Wahyudi dan T. Rinjanto, “Pengembangan Trainer Miniatur Perlintasan Pintu Kereta Api Berbasis PLC Untuk Meningkatkan Standar Kompetensi Merangkai PLC di SMK Dwija Bakti Jombang,” Jurnal Pendidikan Teknik Elektro, vol. 06, no. 01, pp. 01-06, 2017.

Downloads

Published

2019-10-17

Issue

Vol. 3 No. 2 (2019): Patria Artha Technological Journal

Section

Articles

License

Authors who publish with this journal agree to the following terms:

  • The copyright of the accepted for publication articles shall be assigned to patria artha technologocal journal  as the publisher of the journal. The intended copyright includes the rights to publish articles in various forms (including reprints).
  • Patria artha technologocal journal maintain the publishing rights of the published articles.
  • Authors are permitted to republish or disseminate published articles by sharing the link/DOI of the article at patria artha technologocal journal. Authors are allowed to use their articles for any legal purposes deemed necessary without written permission from patria artha technologocal journal with an acknowledgment of initial publication to this journal.

Creative Commons License
This work is licensed under a Creative Commons Attribution 3.0 License