Analisis Perhitungan Stroke Per Hour (SPH) produk cross Tube pada PT. Masbi Sukses

Authors

  • Naufal Rafi Muslim Universitas Singaperbangsa Karawang
  • Oleh Oleh Universitas Singaperbangsa Karawang

DOI:

https://doi.org/10.33857/patj.v6i2.546

Abstract

In the development of the times, the industry in Indonesia began to experience rapid development. PT. Masbi Sukses is one of the industrial companies that produces a component in the form of components from four-wheeled and two-wheeled vehicles. Cross tube is one of the products produced at the company PT. Masbi Sukses. Cross tube is a pipe that is used to unite the swing arm on two-wheeled vehicles. The cross tube has a length of 239 mm with a pipe diameter of 28.6 mm and a pipe thickness of 3.2 mm. In this cross tube production process, using a tool called a press machine, this press machine is given a piercing model of pressing dies in order to make holes in the cross tube product as desired. This study aims to determine the stamping process and also analyze the production process time by calculating strokes per hour on cross tube products, with the results in the form of capacity data, takt time data, and problem solving proposals in the form of fish bone diagrams. With the implementation of this research, researchers hope to provide a detailed reference for PT. Masbi Sukses to make improvements or improvisations related to production productivity in the future.

References

K. Mikro, “Mengenal Mesin Press Dalam Industri,” Klikmikro.com, 2018. https://blog.klikmro.com/mengenal-mesin-press-dalam-industri/.

A. Hilman, “Perancangan dan Analisis Stamping Dies untuk Pembuatan Produk Bracket Bumper Dengan Proses Press Multi Forging,” no. 100, pp. 1—20.

J. Nasution and W. A. Putranto, “ANALISA PENGARUH MODIFIKASI MESIN PRESS BODY AREA 5A LINE TERHADAP PENINGKATAN KAPASITAS PRODUKSI DI PT. ASTRA DAIHATSU MOTOR,” vol. 2, no. 1, pp. 570—579.

Wave20, “Apa itu cycle time, lead time dan takt time,” 2020. https://wave20.blogspot.com/2019/05/apa-itu-cycle-time-lead-time-takt-time.html.

U. K. Petra, “Fishbone Diagram,” pp. 4—14, 2017.

Downloads

Published

2022-01-31

Issue

Vol. 6 No. 2 (2022): Patria Artha Technological Journal

Section

Articles

License

Authors who publish with this journal agree to the following terms:

  • The copyright of the accepted for publication articles shall be assigned to patria artha technologocal journal  as the publisher of the journal. The intended copyright includes the rights to publish articles in various forms (including reprints).
  • Patria artha technologocal journal maintain the publishing rights of the published articles.
  • Authors are permitted to republish or disseminate published articles by sharing the link/DOI of the article at patria artha technologocal journal. Authors are allowed to use their articles for any legal purposes deemed necessary without written permission from patria artha technologocal journal with an acknowledgment of initial publication to this journal.

Creative Commons License
This work is licensed under a Creative Commons Attribution 3.0 License