Uji Kinerja Turbin Crossflow Skala Laboratorium Sebagai Pembangkit Listrik

Authors

  • Sudarmanto Jayanegara Jurusan Pendidikan Teknik Mesin Fakultas Teknik, Universitas Negeri Makassar
  • Rustam Efendi Jurusan Teknik Mesin, Fakultas Teknik, Universitas Sulawesi Tenggara
  • Muhammad Hasim Jurusan Pendidikan Teknik Mesin Fakultas Teknik, Universitas Negeri Makassar
  • Dary Mochamad Rifqie Jurusan Pendidikan Teknik Elektronika Fakultas Teknik, Universitas Negeri Makassar

DOI:

https://doi.org/10.33857/patj.v7i1.704

Keywords:

electricity consumption, growth of population, generators, crossflow turbine

Abstract

The increase in electricity consumption goes hand in hand with the growth of population and industry. Sustainable power plants such as turbines are one option. Turbines and generators are the main components as well as the availability of sufficient water discharge to turn the turbine so that it can be forwarded to the generator. This research was conducted in order to test the performance of a turbine laboratory scale that has been designed. The output power generated in the crossflow turbine is 12.5 Watt to 287.906 Watt for a load of 100 Watt and a variable guide blade with a static head of 0.25 kg/cm

References

BPT. (2021). Outlook Energi Indonesia 2021. (ISBN 978-602-1328-20-0).

KEMEN-ESDM. (2020). Peraturan Menteri Energi dan Sumber Daya Mineral Republik Indonesian Nomor 4 Tahun 2020. No. 171

Fe'I, M. N. S., Arwizet, K., & Irzal. (2016). Rancang Bangun Simulasi Turbin Air Cross Flow. Jurnal Pendidikan Teknik Mesin, 1(2).

Harjanto, N. T. (2016). Dampak lingkungan pusat listrik tenaga fosil dan prospek pltn sebagai sumber energi listrik nasional. PIN Pengelolaan Instalasi Nuklir, 1(01), 39-50.

Heriyanto, H. (2010). Rancang bangun alat kontrol dan proteksi terintegrasi berbasis Zelio logic smart relays untuk PLTMH [Tesis, Universitas Gadjah Mada].

Jaya, M. A., Hamri, Habib, F., & Efendi, R. (2022). Perencanaan Pembangkit Listrik Berbasis Flywheel Ganda. Jurnal Mekanova, 8(1), 36-41.

Jayanegara, S., Djafar, Z., Djafar, Z., Azis, N., & Piarah, W. H. (2020). The Characterization of Thermoelectric Generator in Utilizing the Heat Waste of the Biomass Egg Drying Machine. EPI International Journal of Engineering, 3(1), 30-33.

Mafruddin, M., & Irawan, D. (2014). Pembuatan Turbin Mikrohidro Tipe Cross-Flow Sebagai Pembangkit Listrik Di Desa Bumi Nabung Timur. Turbo: Jurnal Program Studi Teknik Mesin, 3(2), 7-12.

Biswas,S., & Das, A. (2016). A review of design and development of vertical axis cross-flow hydro turbinbe. Renewable and Sustainable Energy Revierws, 59, 1075-1089.

Poernomo Sari, S., & Fasha, R. 2012. Pengaruh Ukuran Diameter Nosel 7 dan 9 mm terhadap putaran sudu dan daya listrik turbin pelton. Jurnal Teknik Mesin.

Dietzel, F., & Sriyono, Dakso. 1993. Turbin Pompa dan Kompresor. Erlangga. Jakarta.

Morong, J. Y. (2016). Rancang Bangun Kincir Air Irigasi Sebagai Pembangkit Listrik di Desa Talawaan [Tugas Akhir, Politeknik Negeri Manado].

Muis, A. (2010). Turbin Air Pada PLTA Larona. Jurnal Ilmiah Matematika dan Terapan, 7(1), 61-69.

Setiawan, Y., Wahyudi, I., & Nandes, E. (2013). Unjuk kerja turbin air tipe cross flow dengan variasi debit air dan sudut serang nosel. Turbo: Jurnal Program Studi Teknik Mesin, 2(1), 21-25.

Sinagra, M., Sammartano, V., Aricò, C., Collura, A., & Tucciarelli, T. (2014). Cross-flow Turbine Design for Variable Operating Conditions. Procedia Engineering, 70, 1539-1548. https://doi.org/https://doi.org/10.1016/j.proeng.2014.02.170

Sumiati, R., & Zamri, A. (2013). Rancang bangun miniatur turbin angin pembangkit listrik untuk media pembelajaran. Jurnal Teknik Mesin, 3(2), 1-8.

Studi eksperimental pengaruh variasi jumlah sudu berpenampang l terhadap daya dan efissiensi turbin crossflow poros horizontal. Jurnal Teknik Mesin, 7(1), 95-102.

Yuniarti, E. (2012). Rancangan Parameter Turbin Crossflow Generator Sikron Pada PLTMH Talang Lintang. Berkala Teknik, 2(4), 286-298.

Downloads

Published

2023-05-11

Issue

Vol. 7 No. 1 (2023): Patria Artha Technological Journal

Section

Articles

License

Authors who publish with this journal agree to the following terms:

  • The copyright of the accepted for publication articles shall be assigned to patria artha technologocal journal  as the publisher of the journal. The intended copyright includes the rights to publish articles in various forms (including reprints).
  • Patria artha technologocal journal maintain the publishing rights of the published articles.
  • Authors are permitted to republish or disseminate published articles by sharing the link/DOI of the article at patria artha technologocal journal. Authors are allowed to use their articles for any legal purposes deemed necessary without written permission from patria artha technologocal journal with an acknowledgment of initial publication to this journal.

Creative Commons License
This work is licensed under a Creative Commons Attribution 3.0 License