Efficiency of Monitoring Household Electricity With ZMCT103C
DOI:
https://doi.org/10.33857/patj.v7i2.709Keywords:
ZMCT103C sensor, clamp meter, household loads, LCD 16x2Abstract
An electric load monitoring system is a tool designed to monitor and measure electricity usage. The process of monitoring the electrical load uses a current sensor model ZMCT103C which is connected to the electrical load. The microcontroller used is an Arduino Uno microcontroller which functions as the main control system which will be connected to a 16x2 LCD monitor with the aim that in the future it can be monitored in real time and can be read directly on the LCD. By carrying out experiments on assembling the ZMCT103C sensor module with Arduino Uno which produces a monitoring feature for current measurement readings. The result of this research is a household electricity measurement monitoring system through a prototype made using the ZMCT103C sensor model with an Arduino Uno which is equipped with a 16x2 LCD monitor to make it easier to monitor the electrical energy load from household electronic devices in the form of current readings. The magnitude of the current measurement obtained from the reading of the ZMCT103C model current sensor will be compared to the ampere meter measuring instrument. By conducting this research, we can obtain data on the percentage of error obtained from the application of the ZMCT103C sensor, so that later from the results of this experiment the ZMCT103C sensor will be able to properly and correctly monitor electricity usage for household loads.
References
Adhieka Danniswara, Yuli Christyono dan Sukiswo (2020). Perancangan Sistem Pengukuran Arus dan Proteksi Arus Lebih Pada Sistem Kontrol dan Monitoring Stop Kontak. TRANSIENT, VOL. 9, NO. 3, SEPTEMBER 2020, e-ISSN: 2685-0206.
Afandi Amir, Arief Marwanto dan dedi Nugroho (2018). Rancang Bangun Purwarupa Alat Monitoring dan Kontrol Beban Satu Fasa Berbasis IOT (Internet Of Thing). Transmisi Jurnal Ilmiah Teknik Elektro 20(1):29, DOI:10.14710/transmisi.20.1.29-33 January 2018
Jumrianto, Wahyudi dan Abdul Syakur (2020). Kalibrasi Sensor Tegangan dan Sensor Arus dengan Menerapkan Rumus Regresi Linier menggunakan Software Bascom AVR . Journal of Systems, Information Technology, and Electronics Engineering 1(1)(2020) 1-14, DOI: https://doi.org/10.31331/jsitee.v1i1. 7525-1
Ladrena Mesiah, Ali Nurdi dan Suroso (2021). “Rancang Bangun Monitor Jarak Jauh Lampu Penerangan Menggunakan Teknologi Real Time Storage Firebase. Jurnal ECOTIPE, Vol. 8, No.2, Oktober 2021, Hal. 85-92, DOI: 10.33019/jurnalecotipe.v8i2.2493
Tirangga Ansori, I Made Ari Nrartha dan A Sjamsjiar Rachman (2018). Rancangan Energi Meter dan Sistem Monitoring Berbasis ARDUINO UNO ATMEGA328. http://eprints.unram.ac.id/10956/1/Jurnal%201%20kolom.pdf
Made Adi Surya Antara, I Wayan Arsa Suteja, Gede Eka Wiantara Putra, Ida Bagus Putu Widja (2023), Electrical Control and Monitoring Home System With ACS712 Sensor & Relay Module via Blynk. PATRIA ARTHA Technological Journal - Vol. 7 Issue 1 April 2023
Downloads
Published
Issue
Section
License
Authors who publish with this journal agree to the following terms:
- The copyright of the accepted for publication articles shall be assigned to patria artha technologocal journal as the publisher of the journal. The intended copyright includes the rights to publish articles in various forms (including reprints).
- Patria artha technologocal journal maintain the publishing rights of the published articles.
- Authors are permitted to republish or disseminate published articles by sharing the link/DOI of the article at patria artha technologocal journal. Authors are allowed to use their articles for any legal purposes deemed necessary without written permission from patria artha technologocal journal with an acknowledgment of initial publication to this journal.
This work is licensed under a Creative Commons Attribution 3.0 License
