Sistem Pemantauan Kendaran Rental Berbasis Global Positioning System (GPS) dengan Kendali Jarak Jauh

Authors

  • Hikmatul Amri Politeknik Negeri Bengkalis
  • agustiawan agustiawan Politeknik Negeri Bengkalis
  • rosihan aminuddin Universitas Patria artha

DOI:

https://doi.org/10.33857/patj.v4i1.327

Keywords:

Global Positioning System, Arduino Uno, modul GSM SIM900A, data logger, rental vehicle.

Abstract

The transportation service supply industry is growing rapidly lately. Starting from online motorcycle taxis, online taxis, to vehicle rental service providers, both motorbikes and cars. Car service providers are usually used for personal and public use with a large capital so security needs to be added to the car. This safeguard is in anticipation of customers who intentionally want to commit criminal acts by escaping the vehicle they rent. Therefore, in this study, a rental vehicle monitoring system was made that is able to send its location if there is an indication of fraud by the customer. This system is equipped with the Global Positioning System (GPS) uBlox Neo 6 and is integrated with the Arduino Uno microcontroller and GSM SIM900A module so that it is able to update location data through Short Message Service (SMS). In addition, this system is equipped with an internal storage module (data logger) so that it can record the trip of the rental vehicle according to the owner's order. From the test results that have been done the system is able to provide location information with an average distance difference of 12.184 meters from the actual position. In addition, the system is able to send its position via SMS with an average delivery time of 6.194 seconds.

Author Biographies

Hikmatul Amri, Politeknik Negeri Bengkalis

Jurusan Teknik Elektro

agustiawan agustiawan, Politeknik Negeri Bengkalis

Jurusan Teknik Elektro

rosihan aminuddin, Universitas Patria artha

Fakultas teknik dan informatika

References

Tirto.id, “Industri Transportasi Diprediksi Tumbuh 11 Persen pada 2019,” Online, 2019. [Online]. Available: https://tirto.id/industri-transportasi-diprediksi-tumbuh-11-persen-pada-2019-djSc. [Accessed: 19-Apr-2020].

I. I. Purnomo, “Sistem Informasi Perancangan Aplikasi Rental Mobil Dengan Metode Visual Basic 6 . 0,” Technologia, vol. 7, no. 2, pp. 111—116, 2016.

D. C. Mahendra, T. Susyanto, and S. Siswanti, “Sistem Monitoring Mobil Rental Menggunakan GPS Tracker,” J. Ilm. SINUS, vol. 16, no. 2, pp. 37—46, 2018.

V. Bernando, “Pengembangan Sistem Pelacakan Kendaraan Menggunakan Modul GSM Dan GPS Berbasis Mikrokontroler ATmega328,” Sist. dan Teknol. Inf., vol. 3, no. 1, pp. 1—6, 2016.

A. Rifai, “Sistem Informasi Pemantauan Posisi Kendaraan Dinas Unsri Menggunakan Teknologi GPS,” J. Sist. Inf., vol. 5, no. 2, pp. 603—610, 2013.

Irvawansyah and Mukhlisin, “Rancang Bangun Sistem Sortir Benda Berbasis Programable Logic Control (PLC),” Patria Artha Technol. J., vol. 3, no. 2, pp. 36—40, 2019.

E. Syahrizal and H. Amri, “Rancang Bangun Sistem SCADA Pengontrolan Kelistrikan AC dan PC Laboratorium Pemrograman Gedung Elektro,” INOVTEK Seri Elektro, vol. 1, no. 1, pp. 21—27, 2019.

H. Amri and J. Lianda, “Implementasi Pengaturan Kelembaban Tanah Pembumian Berbasis Mikrokontroler Arduino,” Setrum Sist. Kendali-Tenaga-Elektronika-Telekomunikasi-Komputer, vol. 7, no. 1, p. 19, 2018.

R. S. Abidin, D. Syauqy, and R. Maulana, “Pengembangan Sistem Tracking Lokasi Low Power Sleep Pada Wearable Device,” Pengemb. Teknol. Inf. dan Ilmu Komput., vol. 2, no. 10, pp. 3569—3576, 2018.

Feranita, E. Safrianti, and Y. S. Tambunan, “Alat Pemberi Makan dan Minum Kucing Otomatis Berbasis Modul GSM SIM900A dan Arduino,” in Seminar Nasional Inovasi, Teknologi dan Aplikasi (SeNITiA) 2018, 2018, pp. 164—168.

P. P. T. Winata, I. W. A. Wijaya, and I. M. Suartika, “Rancang Bangun Sistem Monitoring Output dan Pencatatan Data pada Panel Surya Berbasis Mikrokontroler Arduino,” SPEKTRUM, vol. 3, no. 1, pp. 1—6, 2016.

Downloads

Published

2020-04-25